DeeP ThinkinG

Saturday, July 4, 2020

The best way to get a job

Hello guys,

Hope you all had enough fun during the lockdown days and got enough days of holidays to get bored too

Im here with a new and interesting topic which can surely be of good help to the jobless engineers out here.

The best way to get a job

Look at any industrial area on google maps

example: Bollaram IDA, Cherlapally IDA, Maheswaram IDA(fab city), Jadcherla industrial area, etc

Observe what all industries are there in that area
and what industries are related to us, and in that which industries are in a good run...
make a list of these

research about them... what product, which operations, departments, profit, branches, units, key product, etc...

Check for any employer on linkedin or facebook for entry into the company or allowing at security gate...
if you got no person for that... then at the security check, be confident and walk in directly with a well drafted Resume ; If anyone asks who are you and why are you here, just answer boldly that you are here for an interview and need to meet the HR or technical head

Visit the industries in your list and request about hiring you...

If you are seriously interested about any particular company... Request them that you are ready to work for free during the probation period or for few months.

No employer would dare to lose a potential person if he/she has learnt and performed *well* during the probation period

Strategy will work for sure

This strategy is based on Just a lite logic

if luck or shortcuts have helped you, then you would not be here and have gone through this post
So...
Hard-work and Seriousness is highly mandatory

Tuesday, March 31, 2020

Lockdown thoughts

Today, mom made me watch this movie "Mayuri"
masthundi undi asal...

I felt why my friend Mr. H dint get a nice prosthetic like hers🤨

The heroine in the movie has got her amputated similar to that of Mr.H

Her dream was to become a great classical dancer
She gets a nice Jaipur prosthetic (that too in those days) below knee leg which has the provision to tilt the foot about the ankle

Initially, she used to so hard to even walk with that prosthetic... she bleeds... Yet she doesn't give up
tries hard and finally becomes so comfortable with that leg that she wins a national award for her dance performance
and its a real life story of a woman named Mayuri...
I noticed the same pain in Mr. H while walking...
And with that weight he gained, it pains even more...
At one point time, in the starting, he might have given up walking due to that pain
and he never thought of overcoming it.

I too have one such experience...

Back when I was in 9th class I watched a Chinese martial arts movie titled True Legend... in that a great warrior loses his strength, muscles, fighting skills, sharpness etc when an enemy injects a fatal venom in to his nerves...
The enemy takes Hero's child with him and challenges him to come back and take your son...

That legend who once used to punch pebbles into powder now struggles to hold a spoon to have food...
Eventually, he becomes completely demotivated, accepts his defeat and keeps worrying... with that he goes out of his mind

His wife takes him near and motivates him to a strong person where trains himself and becomes a much more stronger, faster than he used to be in the past... He makes his fist so strong that he could punch a wall and cause indentations to it...

I had a small thought of making my fist like him🤨 Training my fist to be able to punch anything without having to think about the impact n pain it causes to me...
I started punching softer materials 1st... It was too easy... Next I went on to punch walls... it was hard... The every time I tend to punch, I used to worry about the pain it causes after impact... I used to beat slowly n trained my fist to get used to lite impacts...
I kept punching walls from then... In the starting I got wounds on my knuckles... eroded skin layers... Mini minute fractures, which eventually got cured themselves... I made fingers rest and but I dint care...

Where everyone punches a punch bag or boxing bag... I used to punch walls and other hard surfaces...
It continued for several years... whenever I see a wall or any other surface, I used to use my fist to see how hard it is😂

I continued for 5-6 years till I undergone a heart surgery... I had the interest to punch the wall, but it used to create an impact on my breast bone where I had a hard incision coz of surgery...This phase unknowingly made my iron fist to rest for more than a year...

What I thought to convey is...
Pain or whatever it is... it is just an excuse.
If it really matters, you will.
It is all about how badly you want it.
If you want it seriously, you will get it.

Monday, February 10, 2020

AMD NFC Scientific Assistant B (drilling) exam syllabus, patter and Previous year questions

Pattern

100 questions - 120minutes

Mulitple choice type questions with 4 options for each question

Questions are similar to state ecet exam (engg entrance exam for diploma holders)

only technical... (No Aptitude, No General awareness, No General science)

3 marks for each correct answer and 1 negative mark for each wrong answer

Few questions from 2020 Scientific assistant (drilling) post

The metal which is used most generally in casting. a) Cast iron
b) Aluminium👈👈👈
c) Mild steel
d) Grey Cast Iron
Which of the following is a higher pair? a) belt and pulley 👈👈👈
b) turning pair
c) sliding pair
d) screw pair
Priming is essential in a) Reciprocating pump
b) Jet pump
c) Centrifugal pump 👈👈👈 d) All the above
Positive displacement pump of the following a) Reciprocating pump 👈👈👈
b) Centrifugal pump
c) Jet pump
d) None
Discharge of a double acting reciprocating pump is a) LAN/60
b) 2LAN/60 👈👈👈
c) LAN/120
d) LAN
In diamonds, 1 carat = _____ a) 180 mg
b) 200 mg 👈👈👈
c) 220 mg
d) 300 mg
Ackermann system is used in a) Differential system
b) Propeller system
c) Steering system 👈👈👈 d) Lubrication system
Seam welding is also known as a) Continuous spot welding 👈👈👈
b) Multi spot welding
c) Arc welding
d) TIG welding
Brass and bronze are usually welded with which flame.... Oxidising flame
A carburettor is used in which engine.... SI Engine
Petrol engine fuel ignition quality is defined by.... Octane number
Babbit metal is an alloy of.....
Critical damping is a function of.....
Vs and Vc is given and find compression ratio....
In a 6 cylinder 4-stroke engine, Torque developed is 60 N-m and engine speed is 600rpm, then find power developed......... in kW
Compound die is used for....
In casting, top most part is called.... Cope
Which metal is used to make railway tracks...
Induction hardening is for.... Surface hardening process
Which heat treatment process improves ductility... Annealing
Hooke's law is applicable till... Proportionality limit
Modulus of elasticity is.... linear stress upon linear strain
Manoeuvrability in automobile requires... smaller turning radius
Propeller shaft in an automobile is used to in between... Gears and differential
Ratio of Inertia force and Viscous force gives.... Reynold's Number
For turbulent flow, Re should be.... >4000
Strain energy is... Max strain within the elastic limit
Which of the following is a constant volume cycle... Otto cycle
Combination of otto and diesel cycle gives... Dual cycle
Given, in a constant pressure process V2=3V1 and T1 = 27 ⁰C find T2... Ans. 627 ⁰C
The process which involves making a sheet into cups...
Average velocity of the piston of 4-stroke IC engine... a) LN/2
b) 2LN
c) LN/4
d) LN/6
Load used in Rockwell hardness test..... a) Major load
b) Minor load
c) Major and Minor load
d) None
Pin which connects Piston and Connecting rod..... Gudgeon pin
Which is the basic part of IC engine to which all other parts such as cylinder head, valves, spark plug etc are assembled..... Cylinder block
Top most piston ring is also called... Compression ring
Which of the following has more hardness... a) Pearlite
b) Martensite
c)________
d)________
A battery is specified by.... Ampere-hour
Volumetric efficiency of a compressor increases with ______ in compression ratio.
Percentage volume of Oxygen in atmospheric air... 21%
Value of Universal Gas Constant.... 8.314 J/Mol K
A fluid loses its is flow characteristics its reaches below which point a) Flash point
b) Fire point
c) Cloud point
d) Pour point 👈👈👈
Purpose of impact test is to determine a) Toughness
b) Hardness
c) brittleness
d) Strength
If radius of a shaft is increased twice and length is made thrice, then yield strength a)Increases by 2 times
b)Decreases by 3 times
c)Increases by 4 times
d) None
Eutectoid reaction occurs at _____ temperature
For which metal kerosene is used as lubrication.....
Which pump is used for coolant supply for heavy drilling exploration works....
Which drilling is done for general bore wells
Tachometer in vehicles is used to measure....
Mechanical efficiency of an IC engine is given by.... BHP/IHP
Connecting rod connects... Piston and Crankshaft
Camber angle in automobiles is used in....
If a spring is cut into two halves, then its stiffness... Doubles
Reciprocal of diametrical pitch... Module
Stroke length is the distance between... TDC and BDC
Gap between the top of a gear tooth and the bottom of a meshing tooth is....
What happens in fullering process... necking of workpiece
Cold working increases........
A twisting force trying to rotate is called ........
Material handling and plant layout is given by which chart
a)Gantt Chart
b)Emersion Chart
c)Travel Chart 👈👈👈
d)Bin chart
Fixed position layout is also called as... Statis product layout
Two stroke engine is preferred in automobiles because of .....
Fuel is ignitted in diesel engines by....
A question on Pre-ignition, Ignition lag.....
Elongation in tensile test indicates....
HSS is a ...... a)StainlessSteel b)High carbon steel c)alloy steel d)chromium steel
Reheating improves.....
Regeneration improves....
Entropy in a reversible process... zero
100% efficiency case is dealt is which law of thermodynamics....
Two round tubes ends are welded using....
In which milling process, rotation of the cutter and feed of workpiece in same direction... Down milling
Generally preferred 4 cyclinder firing order... 1-3-4-2
Charge in a petrol engine comprises... Air+fuel
What happens at Triple point of water... Three phases(solid,liquid,gas) exist together
Etchent used for a specific material is asked...
ACME thread angle with base... 29 degrees
Advantage of using a Four Jaw Chuck... Irregular workpieces can be holded
1 watt =....... 1 J/s or 1 N-m/s
SI unit of stress.... Newton per Sq. meter
The power plant used in automobile is.... IC Engine
Work done in a constant volume process is..... Zero
Purpose of Vernier callipers.... Radius, Thickness, depth
Which gas is mostly used in TIG Welding.... Argon

Saturday, April 29, 2017

----Limitless usage of tech----

Hey Reader,

Glad to see you back on this blog...!!!!

I hope you remember the last topic, regret if not.
This is gonna be somewhat similar to that...

First of all, in this current generation, everybody uses mobiles, internet, latest tech stuff...

Since a decade, it is rendering our life style... upgrading, upgrading and still upgrading...

but...

my deep thinking always says, its degrading us,

making us stick to those stuff,

making us addicted

Yes... 'addiction'... I meant that...

It is making us stay hours together in that world rather than this real world...

For example, We often see guys of this generation, spending hours holding the mobile,

they spend hours using social networking sites, browsing internet, playing on screen games and so on

This tech, might be making our day to day life, further simple, but we really need to guess, what it might really make us...

It is taking us to that life, where we are forgetting about the real world

It is consuming our time... making us feel, passing the time is simple... It is making us busy always, providing no time to think... to think about new facts, new logics...

It is getting a person closer to us who is much farther... and similarly creating distance between people who are beside

You may think, what made this buddy think like this....

yeah I will make it clear...

Reader, this blog is of Deep thinking and finding few lite logics...

Earlier, people while travelling, used to observe the surroundings, observe people around

(it is a good thing to observe and learn)

but

in today's reality, earphones to ears, eye straight to screens texting people, changing songs...

A mind needs, silence, time and dedicated 'you', to think...

People, these days, keeping themselves too busy, to provide, the minimum environment to think...

Kids, playing on-screens, spending time watching dumb cartoons...

kids must be playing out, which is necessary for that age... even they are getting addicted... from that little age itself...

Literally, that's very pity...

Yeah, internet is making us know what is happening around the globe, but making us not to care what is happening beside us...

Making us dumb,

It is helping us to text long long sentences for hours together with a stranger, but making us unable to speak to them in reality... making us dumb...

May be, there are quite great advantages of using the tech... but making us addicted to those than any other kind of drugs...

Reader,

this isn't like a message to you...

Use the technology only if you really want to but not when you are free...

Remember that, you are not free, you have many things to do than wasting your time with tech stuff...

Use your time to think deeply... it makes your mind much active...

Thanks for your patience...

see ya....!!!

Wednesday, February 15, 2017

SubconsciouS MindS

Hello reader...!!

               We people use the internet as long as we are free...
                                            right...??

but we have no idea, how severely it is damaging us...

and the intensity of that damage cannot be known immediately...!

                  You might think this is something about the brain cancer or something else we have been listening since very past

           This isn't about that my dear reader...! please spare few minutes... this is really very interesting...
             and I am sure, you haven't gone through this topic till now

So... lets directly get into the topic

The human brain, may be classified as...

                  Conscious mind
                  Subconscious mind
                  Unconscious mind

If my guess is right... you are familiar with those terms

here we go...

We often say " I forgot"

what's happening there... why are we forgetting the things even which we regarded as important...

     I say this is due to e-social life..!

yes... you've read that correctly...

           Most of us chat online (on fb, whatsapp, insta, or any other) right...??

               We conversate with our friends, relatives... loved ones too... we might chat seriously, dedicatedly and completely focused...
everything goes good...
done...

     my dear reader, have u anytime, tried to recall what you have texted all time...??

              You may not remember... and what is that which made us like that???

               Digital life...   this is what made us subconscious...

everything we see, everything we read, everything we texted on screens, is made to store in our subconscious mind...

It lets us do what we think but makes that memory temporary...

and how much the digitals we use, is directly proportional to the capacity of sub-consciousness developing in us...

Dear reader, this is what making us subconscious...

Strictly speaking this on screens life, is making us mini GAJINIs

As We are getting habituated not to remember the conversations we had on-screen, the mind gets involved deeply as days go on... eventually the mind applies that to real life...! It tries to take everything to the mind what we made it as sub-conscious...!!

Reader, Please don't get completely attached to screens...!!